The
Model A pulverizer mill is designed for continuous
production grinding and pulverizing, but its small
size makes it ideal for laboratory and pilot plant
use. It is a complete pulverizer unit with motors,
starters. This pulverizer is mounted on a portable
stand with casters. It is equipped with either a 5
HP or 7.5 HP motor, and a 1-3/4" diameter feed
screw with a variable speed drive mechanism.
The
Model A pulverizer is also available with an overhead
feed screw arrangement which has a single 2-15/16"
diameter feed screw for handling larger feed stock
and can take a feed size of up to 2". A gravity
feed model of this pulverizer is also available which
is recommended for high capacity grinding where fineness
of grind is not a priority.
All
Pulva-Sizer® Hammer Mills are capable of wet milling
feed materials and slurries.
|
Pulverizer
Product Specifications - Model A |
| Weight:
LBS |
|
Net |
685 |
Domestic |
750 |
Export |
925 |
| Dimension
Inches |
|
Domestic
|
43x36x66 |
Import
|
48x39x67 |
| Hopper
Capacity CU. FT(STD) |
.51 |
| Type
Rotor (Hammers) |
Swing
or Rigid |
| Screen
Area Sq. In. |
44 |
| Air
Passed (CFM) |
50 |
| |
|
| Hammer
Tip Speed (Ft/Min) |
21,000 |
| Max
Rotor Speed (RPM) |
9,600 |
| Rotor
Dia. (Inches) |
8 |
| Horse
Power |
5-7
1/2 |
Approximate
Idle Load (HP) |
1
1/2 |
