The
Model C hammer mill is a relatively high capacity
compact grinding mill. The rotor diameter is 18"
and the grinding chamber is 14" wide. Recommended
for use with main drive motors ranging from 30 HP
to 75 HP, depending on the material being ground and
the capacity required. The pulverizer cover is hinged
with a handle and 4 swing bolts which allows for quick
access to the grinding chamber. The Model C can be
either direct drive or belt driven and the dual feed
screw arrangement can be supplied in either 2-15/16"
or 4" diameter.
A
gravity feed grinder model is also available and is
recommended for high capacity grinding where fineness
of grind is no priority. In the gravity feed configuration,
the feed material falls by gravity into the grinding
chamber, where it will accept much larger lumps than
the feed screw model. The Model C has three times
the capacity of the Model B
All
Pulva-Sizer® Hammer Mills are capable of wet milling
feed materials and slurries.
|
Pulverizer
Product Specifications - Model C |
| Weight:
LBS |
|
Net |
3,100 |
Domestic |
3,400 |
Export |
3,600 |
| Dimension
Inches |
|
Domestic
|
85x63x40 |
Import
|
87x66x50 |
| Hopper
Capacity CU. FT(STD) |
2.5 |
| Type
Rotor (Hammers) |
Swing
or Rigid |
| Screen
Area Sq. In. |
368 |
| Air
Passed (CFM) |
450 |
| Hammer
Tip Speed (Ft/Min) |
21,000 |
| Max
Rotor Speed (RPM) |
4,600 |
| Rotor
Dia. (Inches) |
18 |
| Horse
Power |
25-75 |
Approximate
Idle Load (HP) |
12 |
